D600 # Customized Diamond Grinding Bit Using For Grinding Saphire
Product Details
| Size: | 22.2*65.6*18mm | Viscosity: | Good |
|---|---|---|---|
| Usage: | Grinding | Grit: | D600# |
| Packing: | In Cartons | Matrix: | Steel Or At Your Request |
| Abrasives: | Diamond | ||
| Highlight |
Saphire Diamond Grinding Head,Customized Diamond Grinding Head,D600 Diamond Grinding Head |
||
Product Description
D600 # Customized Diamond Grinding Head Using For Grinding Saphire
When using a diamond grinding head with a grit size of D600# to process sapphire, the process parameters must be strictly controlled to avoid material cracking or excessive wear of the grinding head. The following are key parameters and operating recommendations:
Grinding head characteristics:
1,Produce as customer require
2,High working efficiency
3,Long working life
4,Top quality
5,Eco-friendly package
Key Parameters:
Speed (RPM) Recommended range: 3000~8000 RPM(Small diameter takes high value, large diameter takes low value)
Feed speed: 0.01~0.1 mm/s (lower value for fine grinding)
Coolant must be used: Deionized water or special cooling oil, flow rate ≥5 L/min.
suggestion:
The diamond grinding head with a particle size of D600# should be based on the core principles of low stress, high cooling, and progressive cutting, reasonably matching the speed and feed, and taking into account both efficiency and surface quality. It is recommended to optimize the parameters through trial grinding and regularly maintain the grinding head status.
Company profile:
Our company focuses on the research and development and production of electroplated superhard tools. We have fully automatic electroplating lines and precision testing laboratories. Our products have passed ISO 9001 and SGS certification. We customize solutions according to your needs.
Product Highlights
D600 # Customized Diamond Grinding Head Using For Grinding Saphire When using a diamond grinding head with a grit size of D600# to process sapphire, the process parameters must be strictly controlled to avoid material cracking or excessive wear of the grinding head. The following are key parameters ...
203.2mm *22.23mm B213/8" Wood-Mizer CBN Sharpening Wheels / Electroplated CBN Wheel For Band Saw Sharping
Cbn Sharpening Wheels Used For Wood Mizer 10/30 Size Eight Inches CBN SHARPENING WHEELS Description Electroplated CBN (Cubic Noron Nitride) grinding wheels need nickel coated . Electroplating have many anvantages . Electroplated grinding wheel has higer working efficiency and longer servicetime , Its speed has also been improved . The grinding wheel will be more wear-resistant and sharp , they specialize in sharpening woodworking band saws . If you need wood -mizer 10/30
Combining Ordinary Cbn Diamond Wheel Honing Reamer Conventional Reaming
Honing Reamer Is Formed By Combining Ordinary Honing And Conventional Reaming HONING REAMER Description Plover hinge also called single stroke honing, is ordinary honing combined with conventional reaming technology, formed a kind of new craft, micron grade precision machining, the machining hole, blind hole hole and groove, hole keyway, steps, is the engine fuel pump, connecting rod, fork, hydraulic valve body, valve cover, air bearings, precision gears, mould guide bush,
Electroplated CBN Grinding Wheels / CBN Abrasive Wheels A Teeth Gap Bands
Electroplated Cbn Sharpening Grinding Wheels Used For Cutting A Band Teeth CBN SHARPENING WHEELS Description Cubic boron nitride has very high hardness, thermal stability and chemical inertness, as well as good red transparent shape and wide band gap width and other excellent properties, its hardness is second only to the diamond, but the thermal stability is much higher than the diamond, has a greater chemical stability of iron series metal elements . Specification Size
CBN Sharpening Wheels For Wood Band sawmill blades 7/39.5 with long working life and good sharpening surface
CBN sharpening wheels for wood band saw sharpening same profile according to customer requirement Description Mostly used CBN wheels are for band saw of following producers: WM Profiles, Mill, Simonds, Dakin-Flathers Ripper 37(22mm,19mm), Lenox, Lenox Woodmaster C, Munkfors, Fenes, Armoth, Hakansson, Ro-Ma, Wintersteiger and others Different wheel profiles for all kind of wood and seasons are available * 10/30 - mostly used universal grinding wheel profile * 9/29 - perfectly
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
