Honing brush can be made according to u drawing size with longer working life and high effiency
|Description||honing abrasive brush|
|Grit size||80--3000 #|
|Material||boron carbide, black silicon carbide, green silicon carbide, brown corundum, white corundum|
The range of our honing brush covevrs a wide range of grits for not only cleaning and finishing of bores.
both for hydraulic & IC ENGINE BORES AND LINERS. These are also extensively used in Plateau honing
of small bores. The special construction afford a mild but constant pressure against the wall of the cylinder giving a fairly uniform material removal & surface finish in the bore. grits and sizes can be selected based on individual application and techincal parameters.
Our honing brush can remove internal burrs and passivate the angle of internal grooves. Burrs will be generated at the grooves and intersecting lines of the internal holes in the general mehanical addiation.
These burrs will scratch the rotary axis that is compatible with the holes, reduce the accuracy. and cause
leakage in the valve body, thus affecting the product quality.
The effect of polishing, after honing, makes the hole have higher accuracy, has achieved more accurate matching .
The abrasive honing brush is mainly used for polshing the precise hole and dressing and polishing the clinder,cylinder body, cylinder steeve, valve body and seat widely used in aerospace, automotive, hydraulic
and other industries.
Specification for honing abrasive brush: 4---500mm
The commonly used grain of honing brush: 80--3000 #
Abrasive honing brush material: boron carbide, black silicon carbide, green silicon carbide, brown corundum, white corundum
Recommended speed of honing abrasive brush: 600-1400 RPM
If u are interested in our production or would like to ask more about it, pls just add my whats app/ we chat: 0086-13783415132.